Ph/Mv-Measurement And Calibration; Ph Measurement (With Manual Temperature Setting) - Tintometer Lovibond SensoDirect 150 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.

pH/mV-measurement and calibration

The meter default settings are as follows:
The display unit is set to pH.
The temperature unit is set to °C.
Manual temperature setting (without ATC probe connection)
Auto power off.
Data logger function sampling time: 2 seconds.
Display layout
25.0 °C
Temp. value
Temp unit
B-2
B-3
B-4

3.1 pH measurement (with manual temperature setting)

1.
Attach the pH Electrode by installing the "Probe Plug" (Fig. B-1) into the "pH Socket/
BNC Socket" (Fig. A-16).
2.
Power on the meter by pressing the "Power" button once.
SensoDirect 150
10.00
PH
Manual Temp.
Manual Temp. or
Auto Temp.
Measurement Value
pH or mV
B-1
25

Publicité

Table des Matières
loading

Produits Connexes pour Tintometer Lovibond SensoDirect 150

Table des Matières