Publicité
Les langues disponibles
Les langues disponibles
step 6
Take your electric firebox out of its packaging and position it between the 2 legs
of the mantel. Once you are close to the wall, plug the firebox into the nearest
outlet.
The firebox comes with 3 metal brackets and 16 black screws (15 required plus
1 spare). These metal brackets must be attached to all 3 sides of the firebox
and 2 sides of the mantel to ensure that your firebox does not move around as
you use it. All 3 trims attach to the firebox by inserting and tightening 3 screws.
Both the left and right side trim attach to the mantel front by inserting and
tightening 3 screws
The top trim does not attach to the mantel, just the firebox. if you have any
questions about the firebox please reference the installation instructions that
come with the firebox.
step 7
You are now ready to position your mantel against the wall. This step requires 2
people to move the unit.
anti-tipping device
At this point you must attach the anti-tipping device to your mantel and your
wall. This device is a safety feature that will prevent your mantel from tipping
over if a weight is applied which can unbalance the unit.
3
Step 8
Step 7
Publicité
