INSTRUCTION MANUAL VOSS.SONIC 360 FUSION
Symbol
7
THE RIGHT LOCATION
When selecting the installation site, observe the general safety
instructions in chapter 2 and the following points:
∙
The VOSS.sonic 360 fusion can be used both with
and without a mounting post. To assemble the
mounting post, insert the three parts of the post
into each other and slide the post onto the sliding
connection (6) on the underside of the device (see
illustration).
I nfo
The height of the mounting post can be
adjusted by removing the middle segment.
∙
Do not place the device in sunken areas without a
mounting post to protect it from water accumulation.
∙
Do not place the device in walkways. Make sure that
the device does not become a tripping hazard for other people.
∙
For best results, make sure that the device is not covered by
anything This would reflect or absorb the sound waves.
∙
The VOSS.sonic 360 fusion secures an area of up to approx. 200 m²,
depending on local conditions. Ensure that no other people's
properties are affected without the owner's consent.
∙
When positioning the device, make sure that the correct trigger
radius is set for the area to be protected (see chapter 8).
45085 - 01.2022 - V1
Meaning
Documents the product's compliance with UK
directives
Read the operating instructions
Positive polarity
DE
EN
FR
NL
23