Hamron 009452 Mode D'emploi page 40

EN
grease or equivalent using a grease gun.
FIG. 13
• Check the hydraulic fluid level, and top up
if necessary.
• Check that the safety and warning labels
on the product are intact and legible.
Replace any labels that are illegible or
have gone missing.
TROUBLESHOOTING
The troubleshooting guide on the next page
used to identify the causes of common
problems and suggestions as to how they
can be rectified. Contact your dealer if you
experience a problem that is not included in
this troubleshooting guide.
WARNING!
• Do not use the lift until any worn or
damaged parts have been replaced.
• Any repairs must be carried out by an
authorised service centre or other
qualified personnel.
42