Presto E-DRY Notice D'installation page 14

Cleaning
Periodic cleaning of the unit is recommended to ensure optimal performance.
 Wipe the cover with a damp cloth and mild cleaning solution.
 Do not Soak, Do not hose down.
 Never use abrasives to clean the cover. Caustic chemicals may damage unit finish.
 No internal parts need any regular cleaning.
Air Speed Adjustment
It is possible to adjust the speed of the dryer to change the sound level during operation. However, when
lowering the motor speed, the drying time will increase. The usefulness of this function will be dependent on
the needs of the owner. The factory setting for dryer's motor speed will be set at its highest speed. See below
for how to adjust the dryer speed :
5. Use Allen key (supplied) to unlock and withdraw the filter access drawer.(fig. 1).
6. Use a small flat blade screwdriver to gently turn adjustment potentiometer(fig. 2) shaft clock- wise to
increase power to maximum (shaft will hard stop; DO NOTOVERTURN!).
7. Turn tool gently clock- wise to reduce power as required (shaft will hard stop; DO NOT OVERTURN!). Note
that at minimum power the unit may not start if there is low line Voltage.
8. Insert the filter access drawer back into the dryer and lock the security screw.
-
Potentiometer
+
14