BEZIOR M2 Instructions page 5

spindle lubricated.
Do not ride at more than the maximum load of the car body
(maximum load: 120kg)
After use, the car cannot be parked in the building's entrance hall,
evacuation stairs, or emergency exit. It must be properly parked in
accordance with safety regulations.
No one-handed riding!
Disclaimer:
After riding, please place the vehicle in a place free from sunlight and rain,
not in a residential building;
Check the motor and brake frequently;
Check the screws of the vehicle and the places to be tightened regularly,
and tighten them regularly.
Recommended torque: (unit: kgf.cm) handlebar screws 60-80, stem
screws 175-200, seat screws 175-200, and wheel screws 320-450;
The front and rear wheels of the vehicle shall be located in the center of
the fork or frame;
Check the spell frequently for any scars, cracks, or excessive wear. The
inner tube and the air nozzle shall be perpendicular to the hub. The
cover tyre that is damaged or excessively worn needs to be replaced
immediately, please ask a professional technician to replace your tyre. If
your cover tyre accidentally punctures and leaks, please contact a
professional technician to repair or replace it.
Maintenance and care:
For the product model, specifications or related information mentioned in
this Operation Manual, the company reserves the right of modification and
final interpretation; the functions of the specific model mentioned in this
Operation Manual are only applicable to that specific model;
The product models, specifications, or related information mentioned in
the Operation Manual may be changed without notice; without prior
written permission of the company, the Operation Manual may not be
copied, modified, reproduced, transmitted, or published in any form.
Please read the Manual carefully before using the product, and operate in
accordance with the Manual, otherwise the company will not be liable for
product damage or personal or property damage caused by improper
use or error.
EN-3