BEZIOR M2 Instructions page 15

Other Interfaces
• Error code notification
List of error codes (example only, depending on customer)
Error code Corresponding error
conditions
21 Controller protection
22 Accelerator error
23 Motor phase error
24 Speed sensor error
25 Brake error
30 Communication error
Solutions to corresponding errors
Check if the three-phase power line is
connected properly
Check accelerator conductor connections and
replace motor if necessary
Check motor conductor connections and
replace motor if necessary
Check the speed sensor conductor
connections and replace the sensor if
necessary
Check the brake system conductor
connections and replace the brake system if
necessary
Check joints and contacts between parts
EN-13