Connections - Festo KNX EduTrainer Notice D'utilisation

KNX Weather Station EduTrainer

9 Connections

1 Power supply 85...265 V AC, 50/60 Hz
2 Weather Station WS/S 4.1.1.2
3 Simulation controller 0...10 V DC brightness
4 A1 simulation output 0...10 V DC brightness
OUT
5 Simulation controller 4...20 V mA wind
6 A2 simulation output 4...20 mA wind
OUT
Simulation controller 92...128 Ω temperature
7
simulation output approx. 92...128 Ω temperature
8 A3
OUT
9 Simulation switch 0/10 V DC rain
10 A4 digital output 0/10 V DC rain
OUT
32
®
11 VCC power supply simulation range 12...24 V DC
12 GND power supply simulation range
13 Power supply N
14 Protective grounding terminal PE
15 Power source for external sensors
16 Weather station sensor inputs
17 KNX system connection
© Festo Didactic 8089834