Technical Data - Festo KNX EduTrainer Notice D'utilisation

7 Technical data

Subject to change
Supply voltage
Power consumption
Bus voltage
Inputs
Input signal/resolution/accuracy
Input resistance for voltage
measurement
Input resistance for current
measurement
Operating temperature range
Max. relative humidity
Operating environment
Dimensions (W x H x D)
Operating environment
Protection class
Overvoltage category
Weight
CE marking
© Festo Didactic 8089834
85...265 V AC, 50/60 Hz
Max. 15 W
21 V... 32 V DC
< 10 mA
4 independent sensor inputs
0– 1 V / 1 mV / +/– 2 % of measuring range end value (v. MBE.)
0 – 5 V / 5 mV / +/– 2 % v. MBE.
0 – 10 V / 10 mV / +/– 2 % v. MBE.
1 – 10 V / 10 mV / +/– 2 % v. MBE.
0 – 20 mA / 20 μA / +/– 2 % v. MBE.
4 – 20 V / 20 mV / +/– 2 % v. MBE.
0 – 1000 ohm resistance/2.5 ohm / +/– 2 % v. MBE.
PT 100 in 2-wire technology/0.1 K / +/– 1 K
potential-free contact sensing (min. pulse width 100 ms)
> 50 kOhm
260 Ohm
5 °C... 40 °C
80 %
Indoors, up to 2000 m above sea level
266 mm x 297 mm x 190 mm
Indoors, up to 2000 m above sea level
1, operation with protective grounding
CAT II, Operation in building installations
Approx. 2.5 kg
In accordance with Low Voltage Directive
In accordance with EMC Directive
As per RoHS Directive
KNX Weather Station EduTrainer
29
®