Ghost Batly Manuel page 17

MENU
Menu Description
Axxx
Set Address
Chnd User Mode
CLxx Static mode
CCxx Jump mode
EExx Pulse mode
FFxx
Fade mode
Stxx
Strobe mode
Soux Sound mode
Manu Manual mode
2.4G
N/A
IR Remote
Ircl
Control
Display
LED
Backlight
t000 N/A
Axxx - Setting the DMX address
Press MENU to select AXXX, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to confirm.
ChMd - Selection of the channel mode:
Press MENU to select CHND. Press ENTER to start setting. Select the channel mode using the
UP OR DOWN keys: successively 4CH, 6CH and 8CH. Press ENTER again to confirm the selection.
- 4CH: 4 Channel mode
- 6CH: 6 Channel mode
- 8CH: 8 Channel mode
CLXX - Static mode selection
Press the MENU key until CLXX is displayed. Press ENTER.
The display shows "CL01 to CL15". Select the desired program with the UP & DOWN keys. Press ENTER to
validate the selection.
Sub-Menu Description
A001 - A512 Setting up a starting DMX address of the fixture
4 channel mode
4ch
6ch 6 channel mode
8ch
8 channel mode
CL01-CL15 Static color selection
CC01-CC99 Speed Chase Adjustment
EE01-EE99 Speed Chase Adjustment
FF01-FF99 Speed Chase Adjustment
St01-St15 Color Selection
Sou1 : Sound mode 1
Sou2 : Sound mode 2
Sou1-Sou4
Sou3 : Sound mode 3
Sou4 : Sound mode 4
R000 - R255 Red color intensity adjustment
G000 - G255 Green color intensity adjustment
B000 - B255 Blue color intensity adjustment
U000 - U255 White color intensity adjustment
On : enable
On-Off
Off : disable
On : backlight constantly on
On-Off
Off : backlight off after 30 seconds
SP01-SP99 Speed Strobe Adjustment
Se01-Se99 Sensitivity Adjustment
Page 17