Presto H-DRY Notice D'installation page 11

This product must be installed by qualified personnel.
This product must be connected using AWG14 rigid cable.
A bad connection to the ground can cause severe electrical shocks that can lead to
death.
Disconnect the power supply at the circuit breaker before installation and maintenance.
All hand-driers must be installed with a 3-core cable. The earth cable must be
connected to the back of the hand-drier.
Dimensions
220
15
Technical Specification
Item
Operating voltage
Air discharge speed
Thermal protection of the motor
Heating element
Heater Thermal Protection
Operation of the circuit
Sensor range
Safety time delay
Comfort time delay
Ø50
273
306
Performance
220-240 VAC, 50/60 Hz, 3.8-4.2 A, 0.84-1.0 kW
84-101 m/s
Auto Resetting Thermostat turns unit off at 95°C
100-500 W, depending on room temperature.
Thermal cut-off at 85°C
Automatic infrared, self-adjusting
130 ±20
Automatic shut-off after continuous use : 60 s
Automatic shut-off after the hands are removed : 2 s
34.5
148.5
11