Operation; Baffle Operation; For More Ice; For More Access - Manitowoc F Serie Mode D'emploi

Baffle Operation

The baffle controls the flow of ice into lower door
assembly area for removal with either a scoop or shovel.
The baffle can also be adjusted and locked at one of
several levels to accommodate flow characteristics of
different types of ice.
Bin is shipped with the baffle in full down position. The
baffle can be raised and locked in higher position for
better flow or when more access is needed.

FOR MORE ICE

If more ice is needed in lower door area:
1. Use full-length handle at top of the baffle to gently lift
and jiggle the baffle to encourage ice to flow into
access area of the bin. (Loose ice will cascade into
lower door area.)
2. When adequate ice has flowed, push the baffle back
down.

FOR MORE ACCESS

When more access is needed or to encourage flow of
less "slippery" ice:
1. Lock gate at higher level by pulling up and holding
the baffle at correct level, and pushing tapered end
of catch into nearest hole in gate (catch will
automatically release when you pull up).
2. To release catch, pull up on the baffle.
6
Section 3

Operation

Using Ice Probe Tool Accessory

Ice probe tool is an optional accessory. If your bin has
been ordered with ice probe tool accessory, mount
probe for easy access on either side of bin in bracket
provided.
If there is adequate ice in bin but lower door area is not
filled with ice, it may be that ice has congealed in bin and
cannot flow. This can often be remedied by quickly
jiggling the baffle several times (see preceding, Baffle
Operation). If problem continues, probe tool can be
inserted through rectangular openings in the baffle and
agitated back and forth to break up congealed ice mass.
Use probe tool only as described above. To avoid
possible injury, keep head and face clear of lower
door area and tool at all times. Do not use probe tool
for other purposes.
! Warning
Part Number 000006528 10/09