EVGA BRONZE BP Serie Mode D'emploi page 4

460W / 510W / 610W / 710W
Power Supply User Manual
Introduction: Premium Power
Precision is power, as the BP power supplies add another affordable
option to EVGA's 80 PLUS ®
the overall length to 120mm - EVGA's shortest ATX power supply
to-date! The BP power supplies feature a 115mm hydraulic bearing
fan to ensure that staying cool and quiet is no tall order. Combining
a full suite of protections and EVGA's 3 Year Limited Warranty, this
power supply should be on the short list for your next system build.
Safety Information
WARNING: This unit has no user-serviceable parts inside. Opening
the casing presents a risk of electrocution and will void the products
warranty. EVGA will not be responsible for any result of improper
use, including but not limited to, any use of the product's outside
of its intended purpose or use inconsistent with the warranty terms
available online. (Warranty information is available at
com/support/warranty and this manual is available at
com/manuals).
Features
STABLE POWER
The BP series has outstanding electrical performance with
stable voltage extremely clean power
and
help you achieve the highest possible overclock (optional) and
provide the most stable and reliable power to all components. The
BP series also has high efficiency
®
efficiency 80 PLUS
and is
TOP QUALITY PROTECTIONS
The BP series comes equipped with the most comprehensive
protection set possible, including Over Voltage Protection (OVP),
Under Voltage Protection (UVP), Over Power Protection (OPP),
Short Circuit Protection (SCP), Over Temperature Protection (OTP),
and Over Current Protection (OCP). This product is also covered
3-year warranty
by a and EVGA's legendary customer service
and support.
Installation
1. Remove the power supply from its packaging.
English
Bronze-certified lineup, while reducing
www.evga.
www.evga.
output. This can
up to 85% (115V~) / 88% (230V~)
BRONZE
certi ed.
2. Use the screws provided with your case to install the power supply
into your computer.
supply with the fan facing down. However, if your case places the
power supply at the bottom of the case and there are no ventilation
holes available, it may be best to install the power supply with the
fan facing up for greater efficiency and reliability.
3. Connect the 20+4-pin ATX cable to the motherboard.
4. Connect the 4+4-pin EPS12V cable to the motherboard.
5. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
NOTE:
Do not attempt to plug an 8-pin PCI-E cable into a 6-pin
connector without first detaching the two extra pins.
ultra
6. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
7. Connect the peripheral "Molex" 4-pin connectors for fans, pumps,
legacy components and other devices/adapters.
8. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
NOTE:
It is recommended to install the power