Silverline 875978 Mode D'emploi page 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Separated or safety extra-low voltage
Double insulated for additional protection
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
Batteries containing cadmium should not be disposed of with
household waste. Please recycle where facilities exist. Check
c
with your local authority or retailer for recycling advice
d
Specification
Drill:
Voltage: ................................. 12V DC
No load speed: ...................... 0-550min
Drilling capacity:
Mild steel .......................... 10mm
Wood ................................ 22mm
Weighted vibration: ............... 1.5m/s²
Sound pressure: .................... 73.2dB(A)
Sound power: ........................ 84.2dB(A)
Protection class: ....................
Battery:
Voltage: ................................. 12V
Capacity: ............................... 1.2Ah
Type: ..................................... Ni-Cd
Charging time: ..................... 3-5 hour
Charger:
Voltage: ................................. 12V DC
Frequency: ............................ 50Hz
Protection class: ....................
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
4
Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
b) Do not operate power tools in explosive atmospheres, such as
c) Keep children and bystanders away while operating a power tool.
Electrical Safety
a) Power tool plugs must match the outlet. Never modify the plug in
b) Avoid body contact with earthed or grounded surfaces, such as
c) Do not expose power tools to rain or wet conditions. Water
d) Do not abuse the cord. Never use the cord for carrying, pulling or
-1
e) When operating a power tool outdoors, use an extension cord
f) If operating a power tool in a damp location is unavoidable, use
Personal Safety
a) Stay alert, watch what you are doing and use common sense
b) Use personal protective equipment. Always wear eye protection.
c) Prevent unintentional starting. Ensure the switch is in the
accidents
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes
Distractions can cause you to lose control
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded
entering a power tool will increase the risk of electric shock
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock
NOTE: The term "residual current device (RCD)" may be replaced by
the term "ground fault circuit interrupter (GFCI)" or "earth leakage
circuit breaker (ELCB)".
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries
off-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that have the switch on