Zyxel PLA450 Serie Mode D'emploi page 13

6 To add another powerline device (C) to your network, connect it with one of the
powerline devices (A or B) already connected to your powerline network (See steps 2
3
and in this section).
A
7 If you disconnected your computer or modem (or any other networking product
connected to your powerline device) in step 1 of this section, you can now reconnect
them.
Congratulations! This connects your powerline devices and any products you have
connected to your powerline devices, such as your home computer or network modem.
Go to Section 5 to set up your Internet connection.
4.2 Set Up a Powerline Network Using the Web Configurator
Follow these steps to set up your HomePlug AV network for the first time.
1 Make sure your PLA450 and other HomePlug AV powerline devices are connected to
power outlets and turned on.
2 Log into the web configurator if you haven't already and click Go to Basic setup. Click
Network > HomePlug to begin setting up your network.
3 The Network Name is like a password for your network. A HomePlug AV adaptor can
only access your network if it has the correct Network Name.
• Select Public, Network Name is HomePlugAV to set your Network Name to the
default (HomePlugAV). Choose this less secure option to easily add a new Home-
Plug AV device (with the default network name) is connected to your wiring, without
having to change its network password.
• Select Private, Network Name is and type a Network Name if you want to make
your network more secure.
A or B
C
ENGLISH
B
13