BIG ASS FANS HAIKU Guide D'installation page 12

UNIVERSAL MOUNT INSTALLATION
3. Install lower safety cable and ground wire
Install safety cable and ground wire lugs with unpainted screws and lock washers (Fig. 3).
Fig. 3
Ground Wire
(Green/Yellow)
4. Install uplight (optional)
Skip this step if you are not installing an uplight.
Make sure wiring harnesses are as close to downrod as possible so that they do not
interfere with uplight installation (Fig 4.1).
Fig. 4.1
10
M4 Lock
Washer
M4 x 10 mm
Screw
Safety Cable