Using The Controls - Crosley CD-4 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Controls

Controls a
t a glance
Dry er Exhaust tips
STEP
1
Select the Cycle
Press the appropriate pad to select the desired cycle.
The indicator light above the pad will illuminate when
the option is selected.
Sensor Dry – automatically senses the moisture in
the load and shuts the dryer off when the selected
dryness level (Very Dry to Damp Dry) is reached. This
cycle is recommended for the majority of loads
including delicates, wrinkle-free and cotton/sturdy
items like towels, bedding and jeans.
Time Dry – may be selected for any load if Sensor
Dry is not used. Press the Time Adjust "+" or "–"
time pad to select the desired number of minutes.
Air Fluff - provides 20 minutes of tumbling in
unheated air. Used for freshening items.
STEP
2
Select the Temperature
Dry Temp – there are four temperature settings. Press
the up
or down
Medium, Low or Extra Low temperatures.
For sturdy cottons or those labeled
Regular
"Tumble Dry. "
For permanent press, synthetics,
Medium
lightweight cottons or items labeled
"Tumble Dry Medium. "
For heat-sensitive items labeled
Low
"Tumble Dry Low" or "Tumble Dry Warm. "
Provides the lowest heated dry
Extra
temperature possible.
Low
5
arrow pads to select Regular,
STEP
3
Select the Dryness Level
Select Dryness Level – press the
pads to select the desired dryness level.
Used to completely dry sturdy or bulky
Very Dry
items including towels and jeans.
More
Used to completely dry the load.
Dry
Normal
Used for drying the majority of loads.
Dry
Use for lightweight items or for leaving
some moisture in the clothing at the end
Less Dry
of the cycle.
Designed to partially dry items. Used for
Damp
Dry
items that lay flat or hang to dry.
or
arrow

Publicité

Table des Matières
loading

Table des Matières