Hoover Expert Serie Guide D'utilisation page 15

Refreshing carpets
WARNING:
To reduce the risk of
personal injury - Unplug the steam cleaner
when assembling the accessories.
1
Place the microfiber pad on the floor
white side facing up. Place floor head
onto pad making sure the entire pad
covers the floor head.
WARNING:
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam Trigger
without water in the water tank.
2
With microfiber pad attached, hook
the steam cleaner into the front of
the carpet glider and push to clip into
place. Carpet glider should only be
used when refreshing carpets.
IMPORTANT:
always ensure the multi-surface Microfiber Pad
is properly attached to the Floor Head.
3
Turn the solution dial to OFF
(0=OFF) when refreshing carpet.
When using on carpets,
4
Push On/Off button to power
steam cleaner on and off.
12