Stagnoli CHRONOS Instructions page 8

The dimensions of the case are based on the distance from the power source, so depending on the
voltage drop, Stagnoli recommends:
00 - 50 mt: 0,5-0,75 mm
50 - 100 mt: 0,75 -1 mm
>100 mt : 1 - 1,5 mm
1. CABLE MANAGEMENT
The CHRONOS traffic light allows the cable to be routed in two ways:
1.A: from the wall to the opening at the back of the bracket [A] and then into the casing
1.B: by using the dedicated pre-hole, cut a hole in the bracket, and mount a standard PG12 cable duct [B], ensu-
ring that the cable duct is mounted before fixing the bracket to the wall
1.A
A
Once the correct routing of the cable has been set, fix the bracket to the wall using the suitable screws and
screw anchors.
2. OPEN THE BOTTOM COVER
8
USEFUL ADVICE
D
C
1.B
B
Open the bottom cover by unscrewing the 4
Phillips head screws placed on the bottom.
Route the cable coming out of the bracket
through the dedicated hole [C] and if neces-
sary through the OR ring [D].
www.stagnoli.com