Stagnoli CHRONOS Instructions page 7

TECHNICAL DATA
* The figure refers to the individual light, assuming that only one light is switched on at a time in a traffic light.
PURPOSES OF USE
Chronos is an adjustable traffic light designed exclusively for residential and industrial environments. Since it is
equipped with multi-voltage electronics, it will only be necessary to wire the traffic light (as shown in the diagram at
page 4). It is possible to supply it at a voltage between 24 and 230V AC/DC without any setting of the voltage used.
Chronos is IP66 insulation class.
Installation, maintenance and in particular access to the internal parts of the traffic light must be carri-
ed out only and exclusively by qualified personnel and with no electricity present.
This instruction manual includes important safety information: read all instructions carefully before in-
stallation. Stagnoli does not assume any liability for damage caused by improper, incorrect or unwise
use of the product. Keep this manual in a safe place for future use.
Once completely installed, the body can be rotated simply by loosening the brackets' fixing screws.
TECHNICAL DATA
Electrical current max. *
Voltage *
Power *
Hours of service
Brightness
Operation temperature
IP protection level
Rotation
Weight
WARNINGS
ROTATION
Adjust it to the best position and tighten them again.
0.028 - 0.1 A
from 24 to 230 V ac/dc
2 - 5W
50,000
122 Lux
-20 / +55 [°C]
66
180°
1.5 - 2.5 - 3.5 Kg
EN
7