habitat et jardin Victoria Mode D'emploi page 17

8. USAGE OF SILICONE OIL
Pull up tightly of the running belt. Then put the silicone oil to
running board. Then start the machine to running 3 minutes
without loading. It is better to maintain like this every 30 hours
working of the machine. This can save lifetime of parts
properly.
9. RUNNING BELT ADJUSTMENT
(1) Running belt deviate to left
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw go 1/4
circle(see fig1). Then make the machine running without loading 1-2 minutes. Please adjust like this to
make the belt till to mid place.
(2) Running belt deviate to right
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw go 1/4
circle(see fig2). Then make the machine running without loading 1-2 minutes. Please adjust like this to
make the belt till to mid place.
(3) Running belt logjam
17
2021-2022