habitat et jardin Courso Mode D'emploi page 7

6. Assemble Instruction
1
3
1) Place the treadmill on the ground, unfold the treadmill by hand carefully. Tighten the
frame to the base with 4 socket head screws in the tool bag (2 screws on each side).
2) Unfold the panel and fix the panel to the supporting frame with the pre-installed
screws.(See Fig 2)
3) The knob at the bottom of the frame can turn around based on the position of the
adjuster, and make sure the knob withstands the base and steady enough. (See Fig 3)
4) Put on safety key on the computer. Finished assemble. (See Fig 4)
2
4
2021-2022