Publicité
Les langues disponibles
Les langues disponibles
SAFETY RULES FOR THE FLOORING CUTTER
1.
READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE
OPERATING THE WO MULTI-FLOORING CUTTERS.
2. If you are not thoroughly familiar with the operation of WO 630 Multi-flooring
Cutter, obtain advice from a qualified instructor
3. Stay alert. Do not operate while under the influence of drugs, alcohol, or
medication.
4. Always wear safety approved eye protection with side shields (ANSI Z87.1)
5. Keep work area free of debris.
6. Keep children and unauthorized persons away from the WO 630 Multi-flooring
Cutter and work area.
7. Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. Use the right tool. Do not force the WO 630 Multi-flooring Cutter or use it for a
job for which it was not designed; use only on approved materials.
9. Keep the blade sharp. A dull blade will not perform properly.
10. Always keep hands away from blade while operating or carrying the cutter.
11. Do not alter or misuse this tool. The WO 630 Multi-flooring Cutter is precision
built; modifications not specified in this manual may result in a dangerous and
unsafe environment.
12. Maintain the WO 630 Multi-flooring Cutter with care. Keep Blade sharp and
clean. Follow instructions for changing accessories.
13. Use only recommended accessories. The use of improper accessories may be
hazardous and cause injuries.
14. Never leave the WO 630 Multi-flooring Cutter unattended. Secure the handle
with the lock chain when not in use.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10 | E-Mail info@wolff-tools.com |
Internet
www.wolff-tools.de
6
Publicité
