FS AP-N303 Guide De Démarrage Rapide page 8

NOTE:
1. Connect the Ethernet cable before mounting the AP on the bracket.
2. The AP should be pushed into the buckle holes smoothly.
3. After mounting, check whether the AP is fixed.
4. The steps of wall mount are the same as the ceiling mount.
(Optional) Enabling the Anti-theft Lock
U P
K
1. Remove the screws on the mounting bracket with a screwdriver and enable anti-theft lock.
UP
K
K
2. Align the buckles behind the AP with the buckle holes of the mounting bracket and push the AP
into the holes in the opposite direction of the arrow to fix.
K
UP
U P
UP
UP
K
K
7