FS AP-N303 Guide De Démarrage Rapide page 12

NOTE: For more details, please refer to the Configuration Guide on the website.
Troubleshooting
The screen displays request timed out
1. Check whether the network cable is intact.
2. Check whether the hardware connection is correct.
3. Check whether the IP address setting of the computer is correct.
4. Check whether the indicators of AP and the computer are normal.
LED is off after the AP is powered on
1. For PoE power supply, check whether the power source is IEEE 802.11af/at compliant, or whether
the Ethernet cable is properly connected.
2. For DC adapter power supply, check whether the adapter is connected to an active power outlet,
or whether the adapter works properly.
Ethernet port is not working after connecting
Check whether the device at the other end of the Ethernet cable is working properly, the Ethernet
cable is capable of providing the required data rate, or it is properly connected.
Wireless client cannot find the AP
1. Check whether the power supply works properly.
2. Check whether the Ethernet port is properly connected.
3. Check whether the AP is correctly configured.
4. Move the client device to adjust the distance between the client and the AP.
Online Resources
https://www.fs.com/products_support.html
Download
Help Center https://www.fs.com/service/fs_support.html
https://www.fs.com/contact_us.html
Contact Us
11