LUCCI Futura Eco 122 Guide D'installation page 6

Futura Eco Installation Instructions
1. Carefully lift the fan and place the down rod ball assembly into the spacing allocated in the mounting bracket
and lock the ball into place. Insert the LED driver into the lower layer of the mounting bracket and then insert
the remote receiver into the top layer of the mounting bracket. Fig. 4
2. Refer to the wiring diagram provided for Electrical Connection/installation. Fig. 5
WARNING: To prevent electrical shock or risk of fire, do not attempt to perform the electrical connection wiring
yourself. All electrical connections must be carried out by a licensed electrician.
NOTE: An additional all pole disconnection switch must be included in the fixed wiring.
3. After completing the electrical wiring at the mounting bracket terminal and connecting the remote receiver power
input wires and fixed wiring via the 4-port quick connectors (1); connect the LED driver power input wires and
remote receiver power output wires via the 2-port quick connectors (3); connect the LED driver PWM signal
input wires and remote receiver PWM signal output wires via the 3-port quick connectors (2); connect the
remote receiver fan output and motor input wires via the 4-port quick connectors (4); also connect the LED
driver output wires and LED light wires via the quick connectors (5). Fig. 5
5 | P a g e
INSTALLING THE FAN
Fig. 4
Fig. 5
V 1 . 0