Publicité
Les langues disponibles
Les langues disponibles
Optional Remote Control
Start your spa without getting out of bed.The optional remote control allows
you turn
ioDIGITAL
Sync Your Remote
• To program your remote control to
work with your system, simultaneously
press down the On/Off Button on
the remote control and the Pause
Button on your controller (controller
must be off).
• Hold both down for about 4
seconds until the remote beeps.
Use Your Remote
• Press the On/Off Button on
your remote control to start or
stop your vertical spa.
• If you've created personalized presets
at the controller, you can also start
your vertical spa simply by pressing
the corresponding preset button on
your remote control.
on from up to 30 feet away.
On/Off
Button
Preset
Buttons
Wall
Bracket
Preset
Buttons
Changing the Battery
• When the remote battery is
running low, the Remote Low
Battery Alert LED on the
controller will glow red.
• To change the remote control battery,
use a small Phillips-head screwdriver to
remove the back cover.
• Insert a new Energizer
CR2032 3V coin cell battery.
• Replace the cover ensuring the
gasket is in the correct position to
maintain the watertight seal.
WARNING: Risk of Fire, Explosion, and Electric Shock.
Replace battery with Energizer or Panasonic CR2032 3V coin cell
battery. Use of a different battery has the potential for risk of fire,
explosion or electric shock. Do not submerge remote control.
or Panasonic
®
®
Publicité
