Publicité
Les langues disponibles
Les langues disponibles
Get Started
Turn Your Vertical Spa On
Press the On/Off Button.
Set Your Temperature
• Turn the Temperature Dial
clockwise for hotter water or
counterclockwise for colder water.
• The screen will show the
Temperature/Preset Display with
your desired temperature.
Temperature LEDs will flash until
your desired temperature is reached.
• Once the temperature is reached,
the screen will change back to the
Spray Outlet Display.
Select Your Spray Outlets
• When the Spray Outlet Display
is shown, the buttons turn the spray
outlets on and off. (Spray outlets
can be body sprays, a rainshower,
a hand shower, etc.) When the
Temperature/Preset Display is
shown, the buttons control presets.
• Use the Spray Outlet Buttons
surrounding the screen to turn on and
off the spray outlets of your choice.
• Spray outlets that are on will be
highlighted (white background)
and the water streams will blink.
• At any time, you may press the Display
Toggle Button to switch between
Temperature/Preset Display and
the Spray Outlet Display.
Set Your Flow
• Turn the Flow Dial clockwise for
more water or counterclockwise for
less water.The Flow LEDs will flash
until your desired flow is reached.
Pause Your Shower
• Press the Pause Button to
temporarily stop your shower. In this
mode, the controller will not shut
down. If you are in pause mode for
more than 3 minutes, the controller
will shut itself off.
• All LEDs will flash to let you know
you are in pause mode.
• Press the Pause Button again to
resume your shower.
Turn Your Vertical Spa Off
• When you are finished, press the
On/Off Button.The next time you
press the On/Off Button, your
controller will return to the last
shower settings used.
• Or create a preset to save your
settings.Turn the page to see how.
Publicité
