clage K 5 Mode D'emploi page 17

Mounting
200
be tightened down completely.
5. Position the appliance on the water connection (5), making sure that the gasket is correctly seated and screw
on the ¾ inch union nut (4) by hand.
6. Insert the wall mounting screws (6).
7. If there is a recess due to the tiles on the wall, this difference in height can be compensated by means of the
two spacer sleeves enclosed with the accessories.
8. Lay a spirit level on the appliance and level it in both directions.
9. Use a size 22 fork wrench to correct the water connection so that the appliance is mounted straight and flat
on the wall.
10. Tighten down the wall mounting screws (6).
11. Tighten the ¾ inch union nut (4), holding the water connection (5) steady at the same time.
12. Refit the cover (1).
13. Turn on the water tap and the valve at the water supply (5).
14. Use the "blue" knob (9) to rinse the appliance with cold water.
198
120
17
293
266
150
5
4
3
2
2
1
CLAGE
270
165