Daewoo DTC-240 Manuel D'instructions page 10

INSTALLATION
Insert one end of line cord into LINE jack of the phone, the other connect with local network.
Use coiled cord connect base unit and handset.
RECEIVING A CALL
 From handset
3. Pick up the handset and talk to the other party.
4. When finished, return the handset to the base.
 Switching to speakerphone
3. When using the handset, press
4. When finished, press
 From speakerphone
3. When the telephone rings, press
voice clearly, speak into the speaker from a distance of 32cm or less.
4. When finished, press
MAKING A CALL
 From handset
4. Pick up the handset.
5. When you hear the dial tone, dial the desired number.
6. When finished, return the handset to the base.
 From Speakerphone
4. Press key
5. When you hear the dial tone, dial the desired number.
6. When finished, press
 Redial
3. Pick up the handset or press
4. Press REDIAL/P key, the last dialed number will be dialed again
HOLD ON MUSIC
 When talking over handset, press HOLD/RING key to enter the hold mode and the hold
music is sent out. In hold mode
3. Press HOLD/RING key to release hold mode and continue to talk over handset.
4. Or hang up handset, it enters hands-free hold mode.
 When talking at hands-free mode, press HOLD/RING key to enter the hold mode and
the hold music is sent out. In hold mode
3. Pick up handset to talk over handset.
key and return the handset to the base.
key again.
key and talk to the caller. For the other party to hear your
key again.
key again.
key
10