NGS Xtreme Artica Mode D'emploi page 3

USER'S MANUAL
WEARING
SWITCH ON OR OFF
1. Move the ON/OFF switch to the Bluetooth position.
2. InOFF position the Bluetooth function will be off, but you can work with the
headset with cable.
PAIR THE HEADSET
If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to make and receive calls, and to play music with
the headset.
1. Ensure that your phone or music device is on and the headset is off.
2. Put the switch in "Bluetooth "mark side and when solid blue flash, push
multifunction button. Red/Blue lights will flash simultaneously.
3. Activate the Bluetooth feature on your phone or music player, and set it to
search for Bluetooth devices.
4. Select the headset Xtreme Artica from the list of founded devices on your
phone or music player.
5. Enter the passcode 0000 to pair and connect the headset to your device. If
your device does not have a keypad, it may use this passcode by default.
6. When the headset is connected to your device and is ready for use, the Blue
indicator light will flash every 2 seconds.
3
OPERATING
Receiving a call
Short press the Multifunction key to receive an incoming call.
Ending a call
Short press the Multifunction key to end a call
Making a call
When you make a call via the mobile phone, the call will be transferred to your
headset automatically, depending on the phone setup. If your phone does not
support this function, short press the Multifunction key to receive an incoming
call.
Voice call activation *
If your phone supports this feature with the headset, when no call is in progress,
press and hold the multifunction key for about 2 seconds. Proceed as described
in the phone user guide..
Redialing the last number *
To redial the number you last called(if your phone supports this feature with the
headset), when no call is in progress, press the multifunction key twice.
Rejecting a call*
Press the multifunction key twice to reject a call.
Volume control
Press and hold volume "+" or "−" key during a call or when you listen to music to
adjust the volume.
Note:
The functions with * mark must be supported by your mobile phone. For more
information, referto the User Manual of your mobile phone.