Style selections 1830FM-23-259 Mode D'emploi page 13

ASSEMBLY INSTRUCTIONS (CONTINUED)
15. Insert six wooden dowels (CC) into the top
outer holes on both corner panel. Attach top
(A), secure with screwing four locknuts (EE) by
Phillips screwdriver.
Hardware Used
Wooden Dowel
CC
Locknut
EE
16. Attach center back panel (M) to shelving areas
using back panel screws (GG).
Hardware Used
Back Panel Screw
GG
WARNING: You must install the tip restraint
hardware to help prevent any accidents or damage
to the unit. We strongly recommend attaching the
tip restraint hardware to a wall stud and your unit.
For all other wall types, please visit your local
hardware store to obtain the proper hardware.
Assembly is now complete. With the help of another
person, move the unit to the final desired position.
Once in the final position, you may attach the tip
restraint hardware to the wall. You may now plug
the heater into the power outlet.
Hardware Used
Tip Restraint Hardware
HH
14 15
1
x 6
x 4
16
x 8
x 1
13
A
CC
EE
A
M
1
HH
1
FF
2
GG
2
Wall Stud