Reprocessing; Preparation; Cleaning; Inspecting - Pari PG 041 Notice D'utilisation

– 9 –
4

REPROCESSING

4.1 Preparation

• Disconnect the connection tubing (together with the tubing
adapter if used) from the air connection of the compressor.
• Remove the tubing adapter from the connection tubing.
• Disconnect the connection tubing from the pressure gauge.
• Remove the test nozzle from the pressure gauge.

4.2 Cleaning

Wipe the pressure gauge, the connection tubing, the test
nozzle and the tubing adapter with a damp cloth.
Replace the connection tubing if these have visible signs of
dirt.
Take care to ensure that water does not get into the connec-
tions on the pressure gauge or into the test nozzle.

4.3 Inspecting

Inspect all components every time they have been cleaned.
Replace any broken, misshapen or seriously discoloured parts.

4.4 Storage

Store this product in a dry, dust-free environment.