BeeWi BBZ252 Manuel De L'utilisateur page 6

6
2.3.Pairing
To pair the Bluetooth RC Car with your device, refer to the pairing procedures in your
mobile phone user manual and follow the instructions below:
- Power on the RC Car to turn the unit in pairing mode
- In the iPhone® Bluetooth menu, search for devices, select the device name "BeeWi Red
Fiat500" on the screen and enter the pass key "0000" to add this device into your phone
device list.
3. USInG THE CAR
3.1. Connection
If it has been previously paired, the car will automatically
connect to the iPhone® when it is powered on.
If this is not the case, you can also go to the iPhone®
Bluetooth menu and select the "BeeWi Red Mini
Cooper" device in your device list. Once the status is
"Connected", close the Bluetooth menu and get back to
the main screen.
3.2. Operation
Open the BeeWi Control Pad application
The car will be connected automatically and the control
screen below displayed. By default the control is done
with the orientation sensor and the car is parked (P sign
in red on the top right of the screen).
Press P to exit the park mode and start using the car.
- To move forward, move the iPhone® downwards
- To move backward, move the iPhone® upwards
- To turn left, turn the iPhone® leftwards
ENGLISH