Atlas Copco ILS Target Quad STB-S Mode D'emploi page 4

Product Information
ServAid
ServAid is a portal that is continuously updated and contains Technical Information, such as:
■
Regulatory and Safety Information
■
Technical Data
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■
Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local Atlas Copco representative.
Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information www.atlascopco.com/sds.
Country of Origin
For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
Please visit: http://webbox.atlascopco.com/webbox/dimdrw
Overview
Technical Product Data
Technical Product Data can be found on either ServAid, or the Atlas Copco website.
Please visit: https://servaid.atlascopco.com
Service Overview
Service Recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guide-
lines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
4
EN
or www.atlascopco.com.
© Atlas Copco Industrial Technique AB - 0000 0000 00
ILS Target Quad STB-S/STB-L
or https://servaid.atlascopco.com.