How to Use
This appliance is for household use only.
BEFORE USING YOUR KETTLE
Remove all packing materials, any stickers, and the plastic band around the power plug.
•
To register your product, go to www.prodprotect.com/applica.
•
• Wash all parts as instructed in CARE AND CLEANING section.
• Select a level surface where this unit is to be used allowing enough space for steam to
escape without damage to counters, cabinets and walls.
• Fill kettle to maximum fill line with cold water. Bring to boil, discard and repeat. Kettle
is now ready for use.
Note: The kettle only operates when placed on the base with the ON/OFF (I/O) button in
the ON (I) position. The kettle automatically shuts off when water has boiled or there is no
water in the kettle.
Important:
• Do NOT fill the kettle with any substance other than water. Heat water only.
• Do NOT operate the kettle without water.
• Do NOT operate the kettle without the filter in place.
• Do NOT overfill the kettle. (Keep water level below the max fill line on the water window.)
FILLING THE KETTLE
1. Remove the kettle from the base.
2. Press lid release button to open cover of kettle.
3. Make sure the removable filter is in place.
4. Fill with desired amount of cold tap water.
5. Press lid to close.
6. Unwind cord from base.
7. Place the kettle securely on the base.
BOILING WATER
1. Plug cord on the base into standard electrical outlet.
2. Press the On/Off (I/O) switch to the On (I) position. The power indicator light turns on
and the water begins to heat.
3. When water boils, the kettle and the power indicator light will automatically turn off.
Note: You can also turn the appliance off at any time by lifting the ON/OFF (I/O) switch to
the OFF (O) position.
Warning: Kettle filled with boiling water is hot. Use only the handle to pick it up.
When taking kettle to the table, carry kettle with caution to avoid spilling. Set it on a trivet
or hot pad to protect the table surface or tablecloth.
Important: Hold kettle handle firmly when pouring, especially when filled to the max fill
line. Do not pour too fast.
4. Unplug the kettle when not in use.
5