Flame Characteristics - NewAge Products PLATINUM Guide D'installation Et Mode D'emploi

Flame Characteristics

Proper placement of each burner is critical after cleaning they must be centered on the brass
orifice, resting level without any rocking. Failure to meet these conditions may cause a very
dangerous condition that can cause personal injury and property damage.
Gas control knobs should be in the 'OFF" position, and fuel line should be disconnected from gas
valve manifold. To reduce the chance of FLASHBACK, the procedure below should be followed at
least once a month or when your side burner has not been used for an extended period of time.
YELLOW TIPPING
LIGHT BLUE
1/2" (13mm) Flame Height 1/2" (13mm) Flame Height
DARK BLUE
BURNER
Proper Flame
Turn off gas at source and disconnect the unit before servicing. To avoid the possibility of burns,
maintenance should be done only when the side burner is cool. A leak test must be performed
annually and whenever any component of the gas train is replaced or gas smell is present.
28
CAUTION
CAUTION
SPUTTERING FLAME
BURNER PORT
Improper Flame