Velodyne vQuiet Mode D'emploi page 5

Charging headphones
Charging the vQuiet before using for the first time is recommended in order to maximize battery life. Low
battery is indicated by the LED status indicator on the left ear cup displaying red.
To begin charging, connect the USB cable (micro USB end) to the port behind the right ear cup.
Connect the other end of the USB cable to any charge capable USB port or a USB-style charger. Your
vQuiet headphones will begin charging, as represented by the red
complete, the LED status indicator will shut off.
Charge time
Active Noise Cancellation (ANC) operation time
LED indications
Function
Power on
Power off
Low power
Charging
Charging complete
Noise cancellation
Noise cancellation is activated by the switch located on the left ear cup.
Turn the switch to the on position to activate noise cancellation (represented by the
The Velodyne logo on the left ear cup serves as the bypass button.
How to connect
To connect your vQuiet headphones, plug the blue
ear cup.
Plug the unmarked 3.5 mm (1/8") connector into the audio output port on your audio device.
LED status indicator. Once charging is
About 1.5 hours
Up to 35 hours
LED Activity
Blue
No light
Red
Red (right ear cup)
No light (right ear cup)
marked 3.5 mm (1/8") connector into the left or right
vQuiet user's guide
blue LED).
4