LaserLiner SuperLine 2D Mode D'emploi page 10

3 Wall applications
For horizontal and vertical levelling fix the baseplate to the
wall with the special pins (7). The optional adhesive strips
can be used for this, Laserliner ConTacts (Art-No: 081.101A).
Then place the device onto the baseplate and align the levels
vertically and/or horizontally.
4
Mounting on the wall
1. Place device on the wall.
2. Push the special pins through
the holes provided.
5 Setting an angle
The scale ring (6) and the device can be rotated
independently of one another. This makes it easy to set any
desired angle.
!
Regularly check the calibration before use, after
transport and after extended periods of storage.
! Modifications or changes to the device are not
permitted, this will otherwise invalidate the approval
and safety specifications.
!
The device must only be used in accordance with
its intendedpurpose and within the scope of the
specifications. Keep out of reach of children.
10
EN