emerio AC-125112.1 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

shown on the screen: LOW (logo "
"
")... in turn.
Swing function and air flow direction:
Press swing button to make the air outlet louver rotates; press it again to cancel the swing function, and
the air flow is fixed at a specific direction. The logo "
is on.
Cooling:
Press the cooling button to start the cooling function. The logo "
again the button to cancel the function. This function is only effective when the water tank has enough
water. To make the air cooler, put the frozen ice pack(s) into the water tank. Do not activate this function
when the water in the water tank is below the "MIN" level; add enough water into the water tank first.
Mode selection:
Press the wind mode selection button to choose the running mode from Sleeping mode → Natural mode
→ Normal mode → ... (Repeating).
1) Normal mode: under this mode, the motor works with the preset speed, and the logo "
displayed. You can press the speed button to choose speed Low /Medium /High.
2) Natural mode: under this mode, the logo "
natural mode program. It is generating softer and more comfortable air flow, you will feel like the wind
from the nature. You can press the speed button to choose Low /Medium /High natural wind.
3) Sleeping mode: under this mode, the logo "
sleeping mode program. Air flow will weaken with the decrease of body temperature when you fall
asleep, which will protect you from catching cold. You can press the speed button to choose Low
/Medium /High sleeping wind.
Timer Setting:
Press timer setting button to choose your desired working time "0.5 h → 1 h → 1.5 h → 2 h → 2.5 h → 3 h
→ 3.5 h → 4 h → 4.5 h → 5 h → 5.5 h → 6 h → 6.5 h → 7 h → 7.5 h → no timer → 0.5 h ... ("h" stands for
"hour")". The corresponding LED lights will be on. When the selected time has passed, the appliance will
be turned off automatically.
NOTES:
1. It is recommended to change water and clean water tank frequently.
2. Activating the cooling function with insufficient water may cause malfunction of the water pump.
3. Do not take out the water tank immediately after the appliance is just turned off. Wait several minutes to
avoid the water dripping out from the cooling pad.
REMOTE CONTROL
This unit has a remote control. One piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take
the battery out of the remote control. Keep button cell batteries out of reach of small children.
The functions of the remote control buttons are the same as the functions of the buttons on the control panel.
CLEANING AND MAINTENANCE
Unplug the appliance during filling and cleaning.
Make sure there is no water on the control panel.
Clean the dust filter and cooling pad
1. Unplug the appliance.
2. Pull off the dust filter.
") → MIDIUM (logo "
" is shown on the screen when the swing function
" is displayed. The appliance runs according to the
" is displayed. The appliance runs according to the
- 5 -
") → HIGH (logo "
" will be shown on the screen. Press
") → LOW (logo
" is

Publicité

Table des Matières
loading

Table des Matières