Beha-Amprobe AT-6010-EUR Mode D'emploi page 22

4. SPECIAL APPLICATIONS
4.7 Tracing Underground Wires
The AT-6010-EUR can trace Energized and De-energized wires underground the same way it can
locate wires behind walls or floors. Follow general Wire Tracing instructions in section 3.
4.8 Tracing Low Voltage Wires and Data Cables
The AT-6010-EUR can trace data, audio, and thermostat cables (to trace shielded data cables,
refer to section 4.6).
Trace data, audio, and thermostat cables
1. Connect the Transmitter using the separate ground method described in section 3.1.
2. Turn on the Receiver and trace the wire. Tracing mode is automatically activated.
Figure 4.6b: Tracing a shielded wire disconnected
from the ground at far-end
Figure 4.7: Tracing Underground Wires
18