Publicité
Les langues disponibles
Les langues disponibles
V 2.8
SPECIFICATIONS
Max. Load Capacity
Length
Width
* Caution: Bouncing or dropping onto ramps increases the load and may reduce rated capacity
substantially or damage the ramps.
SAFETY
WARNING! Read and understand all instructions before using these ramps. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
NOTE: Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well lit and free of distractions.
2.
Keep anyone not wearing appropriate safety equipment away from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach of children.
PERSONAL SAFETY
CAUTION! Wear personal protective equipment approved by the Canadian Standards Association
(CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection for the eyes.
2.
Wear gloves that provide protection based on the work materials or to reduce the effects
of tool vibration.
3.
Non-skid footwear is recommended to maintain footing and balance in the work environment.
4.
Wear steel toe footwear or steel toe caps to prevent injury from falling objects.
Visit www.princessauto.com for more information
2 pc Rugged Tread
Steel Ramps
1,000 lb (static conditions)*
72 in.
8-1/2 in.
8338089
3
Publicité
