Instructions for use for the user
9.4. Combi mode – Quick-start
1. Use the temperature selector 4 to set the preferred sauna temperature.
The further it is turned to the right, the higher the sauna cabin tempera-
ture. In combi mode, the humidity symbol 5 shows the maximum tem-
perature which can be set.
2. Use the humidity selector 6 to set the preferred humidity.
The further it is turned to the right, the higher the intensity.
3. Briefly press the time button 9.
► The sauna heater and the evaporator are switched on and start to heat.
► The control lights 1 and 3 light up.
9.5. Sauna mode with preset time (starting the time-delay)
WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
You can set the preset time to increments of 15 minutes. The maximum preset
time totals 23 hours and 45 minutes. The preset time is displayed in hours and
minutes, e.g. 8 hours and 15 minutes is displayed as 8.15.
1. Use the temperature selector 4 to set the preferred sauna temperature.
The further it is turned to the right, the higher the cabin temperature.
2. Press and hold the time button 9.
► The display 2 begins at 00.00 and increases in increments
of 15 minutes.
3. Once you have reached the required preset time, release the
time button 9.
► The timer is running, and the remaining preset time appears
in the display 2.
► The dot between the hours and minutes on the display 2 flashes.
► Once the preset time has elapsed, the sauna heater switches on.
WORLD OF WELLNESS
p. 24/32