Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Flip the tank housing (D) upside down and
attach the wheel assembly (J) to the base of the
J
CC
tank housing (D) using 2 M8 x 16 screws (CC).
D
2. Attach the anchoring arms (FF) onto the base of
the tank housing (D) using 6 M6 x 12 screws
BB
DD
(BB) and 6 M6 nuts (DD).
FF
D
3. Attach the tank housing supporter (G) into the
D
tank housing (D) using 1 M8 x 16 screw (CC) and
AA
2 M5 x 12 screws (AA). Do not fully tighten to
allow room for adjustment later in the assembly
G
process.
CC
1-866-771-2663 | Page 7
Publicité
