GB
The manufacturer is not liable for damage
which is caused through inappropriate use
or incorrect operation.
General description
Function description
The garden vacuum has a blowing/
vacuuming unit for the blowing and suc-
tion functions. In blowing mode, you can
quickly blow together fallen leaves or
blown them out of places that are difficult
to reach. In suction mode, the leaves are
shredded to save space, and blown out of
the ejector outlet into the collection bag.
The handles are equipped with vibration
dampers to improve working safety and
reduce wrist and arm joint fatigue.
The collection bag is fitted with one-sided
inner lining to prevent fine dust and wet-
ness from penetrating the bag to the out-
side. This lining is located on the left-hand
side of the bag to protect your working
clothes from soiling.
You can vacuum up dry leaves and leaf
parts on the flat with the flat suction noz-
zle. The guide rollers at the lower end of
the tube make it easier to guide the tube
along the ground.To protect the user,
the appliance can only be used with
the blowing/suction pipe completely
installed. The appliance is double-insu-
lated, and does not need to be earthed.
Refer to the following descriptions for in-
structions on how the operating controls
work.
66
Overview
1 Guide rollers
2a+2b Two-part blower/suction tube
3a+3b Fastening screws
4 Additional grip
5 Carrying strap
6 Attachment bar for carrying
strap
7 Airstream regulator
8 On / OFF switch
9 Casing handle
10 Motor casing
11 Ventilation openings
12 Mains cable
13 Cable retainer
14 Operating mode selection
switch
15 Collection bag frame
16 Collection bag
17 Zip fastener for emptying
18a+18b Retainer loops for collection bag
19 Blower opening
20 Suction opening
21 Holder for guide rollers
Assembly instructions
Remove the power plug before all
work on the device. Employ only
original parts. Danger of injury.
Unpacking
Unpack the device and check whether it is
complete.
Dispose of the packaging material cor-
rectly.
-
Two-part blower / suction tube with
2 fastening screws (long) + 1 fastening
screws (short)