Télécharger Imprimer la page

Grizzly Tools ELS 2614-2 E Traduction De La Notice D'utilisation Originale page 64

Souffleur de feuilles électrique

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
However, the length of use can
be extended by using suitable
gloves or taking regular breaks.
• Do not use the device in the
rain, in bad weather or in a
moist environment. Work in
daylight or under good artificial
lighting.
• Do not work with a device
which is damaged, incomplete
or altered without the approval
of the manufacturer. Check the
safety status of the device be-
fore use, in particular the power
cable and the switch.
• Employ the device in a com-
pletely assembled condition
only.
• Employ the device suction op-
erating mode only when the col-
lection bag is attached. Check
the grass bag regularly for wear
or damage.
• Do not intake any burning,
smouldering or smoking mate-
rials (e.g. cigarettes, embers
etc.), fumes or easily inflam-
mable, poisonous or explosive
materials.
• Only use the replacement parts
that are supplied and recom-
mended by our Service Centre.
• Remove the plug from the plug
socket
- when you are not using the
device,
- transporting it or leaving it
unattended;
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance
work or replacing accesso-
ries;
64
- when the power or extension
cable is damaged; after con-
tact with foreign bodies or in
case of abnormal vibration;
• Do not attempt to repair the
appliance yourself unless you
have specific training to do so.
Leave any work not listed in this
manual to our Service Centre.
• Do not intake any moist or wet
material or any liquids.
• Do not use the device in closed
or badly ventilated rooms. Do
not use the device near inflam-
mable liquids or gases. In case
of non-observance of these di-
rections, danger of fire or explo-
sion exists.
• Keep the device in a dry loca-
tion and out of reach of chil-
dren.
• Handle the unit with care. Clean
the ventilation slits regularly;
keep to the maintenance in-
structions.
• Keep all cooling air inlets clear
of dirt.
Electrical safety:
• Make sure that the mains volt-
age is compatible with the infor-
mation of the label.
• Connect the device, as far as
possible, only to a plug socket
with a ground-fault circuit inter-
rupter (g.f.c.i switch), with a rat-
ed residual current at not more
than 30 mA.
• Check the device and the pow-
er cable with plug for damage
before every use. Avoid bodily
contact with grounded parts
(e.g. metal fences, metal post).

Publicité

loading