Publicité
Les langues disponibles
Les langues disponibles
Translation of the original instructions
BATTERY REPLACEMENT (3*3.6V 300MAH NI-MH)
NOTE : FOR SAFETY'S SAKE, THE USER IS NOT ADVICED TO CHANGE THE BATTERY BY HIMSELF OR HERSELF.
PLEASE ASK A PROFESSIONAL FOR HELP.
1. Detach the 3 LED Flashlights by removing the flashlight 1 away from flashlight 2. Hold the flashlight 1 and 2 firmly and pry open
the assembly by twisting action shown in Fig.1.
2. Detach the flashlight 2 and 3 by repeating the step 1 above for the flashlight 2 and 3.
3. Remove the battery compartment cover by sliding it away from the flashlight body.
4. Install (9pcs NI-MH batteries, each 1.2V 300mAH) batteries following the orientations of batteries shown on the flashlight hou-
sing into the battery compartment. Insert the Negative (-) terminal of batteries toward the LED pivotal head direction
5. Replace the battery compartment cover back into the designated location and snap to engage securely.
6. Repeat steps 3 through 5 for other flashlights
Replace the battery according to the following illustrations :
CARE AND MAINTENANCE STORAGE
Store the work light and charging adapters in a clean and dry area. Be sure to keep the charging adapters supplied with this pro-
duct stored separately from similar items as only charging adapters included with this light are compatible. Using a non-compatible
charger could cause damage to the light or personal injury.
The light may also be stored in a vehicle for use in roadside emergencies. To prevent the light and any of the accessories being
damaged, please ensure that it is properly secure and in a safe place inside the vehicle.
CLEANING
All exterior surfaces of the work light can be wiped clean with soft cloth dampened with a soap and water solution. Do not immerse
or submerge any part of light in water or any other solvent. Never use solvents or cleaning agents containing petroleum (petrol,
kerosene, oil), paint thinner, turpentine, alcohol, or ammonia. Harsh materials like these can damage surfaces.
MAINTENANCE
Only qualified service personnel must perform repairs. Do not open the exterior casing of the work light as there are no user ser-
viceable parts inside. Opening or visible attempts to open or repair a light may void any guarantee and / or cause damage to the
product or personal injury.
This product contains an internal nickel-metal hybrid battery pack formulated from environmentally sensitive ma-
terials. This product must be disposed of properly, with due care for the environment. Please return this product to
your local dealer or to your local recycling station, where batteries will be recycled or disposed of properly.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
PORTABLE TRIPOD LAMP 250L
EN
7
Publicité
