Patch Cord Installation; Labeling - Leviton Opt-X 5WMNT-01C Mode D'emploi

ROUTING FOR COPPER APPLICATIONS

LABELING

A Port Identification Label is provided with each Wall Mount Enclosure. The label(s) should be affixed to the inside of the
patch bay door. Labeling within the slot position cells can be achieved with printed labels or via excel based spreadsheets
available via download at www.leviton.com.
DI-000-5WMNT-20A

PATCH CORD INSTALLATION

NOTE: Ensure that the label surface area is clean
of dirt, oil, and debris. Recommend use of isopropyl
alcohol or a simple soap and water solution when
wiping down surface area.
Page 10 of 30