Greencut MMG185 Manuel D'utilisation page 56

56
15
1. Control panel
2. Connector (-)
3. Connector (+)
4. Ground cable
5. Carrying handle
6. Electrode clamp cable
7. Gas connection
The arc welding machine adopts the latest power module and pulse anchor modulation (PWM) technology in addition
to insulated bipolar gate transistor (IGBT). You can change from a medium frequency to a working frequency by
replacing the transformer. The equipment is characterized by its small size, low power consumption and a portable
structure.
The welder uses shielded welding gas, active gas for MAG welding and inactive gas for MIG welding.
The welder has automatic protection functions for overvoltage, over-current and over-heating. If any of the above
problems occur, the alarm light on the front panel illuminates and the output current is automatically turned off to
protect the equipment and prolong its life.
Welding machine characteristics:
1. Digital control system, real-time display of welding parameters;
2. High performance multifunctional energy source (MMA/ MIG/ MAG);
3. Waveform control, stable welding arc;
4. IGBT technology, low power dissipation;
5. The rated circuit duty is 30% (40°C).
The welder is suitable for different materials such as stainless steel plates, carbon steel, alloy steel, copper ,titanium, etc.
It is also used for petrochemistry, architecture, car repair, bicycles, crafts, etc.
MAG- Active Metal Gas Welding
MIG- Welding of Metal Gas lnerte
18
19
8. Voltage Display Screen
9. Alarm light
10. Function selector
11. Intensity selector
12. Welding voltage selector
13. Wire speed selector
14. Manual thread exit
17
15. Torch
16. Mask
17. Brush/brush
18. Nozzles
19. Bearing
16