EDM Product 07135 Mode D'emploi page 9

REF. 07135
CHARACTERISTICS
- Power: 2.000W
- 3 levels
FUNCTIONING
- Place the appliance on a flat and dry surface.
- Before connecting the device to the network, make sure that the switch is in the "0" position.
- Plug the power cord into the 220/240V - 50Hz AC outlet.
- With the 3 power system you can start the device.
POSITION 0: OFF
POSITION 1: 750W
POSITION 2: 1.2500W
POSITION 3: 2.000W (+ fan TURBO)
- If you do not use the appliance for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the motor.
- If you notice any anomaly (such as unusual device noise), turn off the device and unplug it
immediately.
- Make sure that no objects or liquids get inside the device through the openings.
- The device should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.
CLEANING AND MAINTENANCE
- Make sure that the appliance is switched off before cleaning it.
- Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
- Do not immerse the appliance in water or any other liquid.
- If the appliance is not going to be used for a long period of time, protect it and store it or after clea-
ning it in a dry place.
INSTALLATION
- The appliance must be placed vertically always respecting the distances.
- To install your appliance on the wall use 2 screws and 2 appropriate plugs (not included)
- Hang the appliance on the wall and secure it in an upright position using the 2 holes in the brackets
of the appliance.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD